Hello. I’m looking for a software to save web pages from my computer and phone and read them later in my ereader device that has wifi connection and a rudimentary browser. Ideally, the software would turn the web pages into some sort of reader view mode to make them more fluid for the ereader, but that’s not necessary. I want something as simple as possible that I can host locally on a raspberry pi-like device. I don’t need long term archival or fancy features. Do you have any recommendations? I believe you’re the best people to know a nice tool for that job.
Edit: Thank you, everyone! I got a bit overwhelmed here, but I will check everything in my time.
You must log in or register to comment.
Linkding is a bookmark aggregator that can save pages for offline viewing including a simplified reader view.
I really wanted to like Wallabag. What held me back was the high percentage of pages it failed to scrape. So this is one area where I decided not to self-host.
I understand it can be annoying but when it does I temporarily host a text version of the article on my website and save it from there
I will check them both, thank you. I don’t think my device supports koreader, but maybe I can read directly from the browser.
Have you tried koreader? I have an old Kobo on which I actually used pocket, but I’m reluctant to try koreader again because I tried it a few years back and it was not a pleasant experience.
I’m hoping it’s better now…
Yes I use it and it works ok for me. Maybe Kobo will consider official support for Wallabag now that Pocket is discontinued.
I see hints that they may replace it with Readwise.
Pocket just works. And now Mozilla is killing it. It’s a shame. There are even companies asking them to take over the software and support. So pocket will stay… Not sure how far that is.
I’ve been using Wallabag for a few years now and really like it. (It’s the one thing I’m not selfhosting, though – I’ve been using their hosted service. But it should run on a raspberry pi with no problems.)
You can also export to epub, but you have to do that manually. OP, does your ereader run android? There are wallabag apps available, which are nice because they usually work offline after downloading articles from your wallabag server.
It’s a tolino vision 2. Technically, it runs android 4 under the hood, but I would need to tinker with it via adb to run something else, and the small storage space available makes this not so appealing. I’d prefer to leave the complexity to the server and do the reading inside the browser in the ereader.
Gotcha. The web UI in wallabag is nice and works pretty well with ereaders. It’s already black-and-white, although it doesn’t have pagination, so you’ll have to scroll.
This!
Currently testing out Shiori. I have tried both it and Readeck on my Raspberry Pi 3B running 32-bit Raspbian ‘Bullseye’. From an installation and performance perspective, Shiori is easier: 32-bit binaries are available and its web interface is a bit more responsive. If you are not running a 64-bit version of the Raspberry Pi OS, you have to build Readeck yourself (which I successfully did).
The main attraction of Shiori over Readeck is that it has both a readable and archive view. The main downside for me is it lacks the read/unread feature of Readeck and Pocket (although that’s apparently something planned for future and in the meantime, it’s possible to workaround using tags).
Both have a browser extension to enable capturing pages that contain Javascript and do not gracefully degrade. Both also have an export-to-ebook function that may suit your e-reader.
Bottom line: if you have an RPi4 or later, then Readeck is probably want you want. If you’re running an older Pi, though, Shiori may be a better option.
I use Readeck for ‘read it later’ type documents or articles, and Karakeep for data preservation. The only downside that I can think of with Readeck is that there is no real ‘one click export’ of the database housing all your articles. However, you can download the entire folder containing the database and all the zip files and transport them to a new server or make it a backup. Other than that, Readeck checks my boxes. It has an iOS app and an extension for Firefox…not sure about chrome as I avoid it like the plague.
I’ve been meaning to install ArchiveBox for something like this, though I’m not sure offhand if it’ll also save ereader-friendly versions.
ArchiveBox strikes me as being a rickety pile of hacks, but it does mostly do its job out of the box. The built-in search is abysmal however and must be replaced with one of the other options to be useful.
Their site leaves a bit to be desired, but they do have PDF versions along with many others it will scrape in
Don’t forget about linkwarden
I have a simple setup where I use the Obsidian web clipper to save web pages and Syncthing to have the Obsidian vault synced to my Boox Go 10.3. Works like a charm.
I use the Obsidian web clipper
Probably a silly question but, does the webclipper work for the selfhosted version or just the Windows version.
That’s an interesting setup, but my ereader probably doesn’t support the tinkering needed to install syncthing on it (it’s a refurbrished tolino vision 2) and the available memory is too low.
I am once again called to praise orgzly.
The idea is simple, it keeps all your info in plain text files on device. It allows tags for whatever you need, recipes, articles, books to read, whatever you like.
Keeping it in sync with a PC is possible in several ways, I use syncthing.
It is for sure not the easiest solution, but it’s all open source, all plain text and gets the work done.
P.S. on PC I use logseq to edit my org files, but there are other options.
P.S.2 I read the question again and I had missed the part with the e-reader. I doubt my approach will help there, but I will leave the comment in case it is helpful to someone.
a software
Nope. That word doesn’t work like that.
I mean, at least tell them what the correct usage is.
OP, you probably want “software package” or “a piece of software”.
“Software” is a mass noun, like “butter”. You can’t have “a butter”. You can have “a pound of butter”.
In English, mass nouns are characterized by the impossibility of being directly modified by a numeral without specifying a unit of measurement and by the impossibility of being combined with an indefinite article (a or an). Thus, the mass noun “water” is quantified as “20 litres of water” while the count noun “chair” is quantified as “20 chairs”. However, both mass and count nouns can be quantified in relative terms without unit specification (e.g., “so much water”, “so many chairs”, though note the different quantifiers “much” and “many”).
https://en.wiktionary.org/wiki/software
Usage notes
Software is a mass noun (some software, a piece of software). By non-native speakers it is sometimes erroneously treated as a countable noun (a software, some softwares).
“A something” is only correct if the noun is a countable noun.
I’m guessing you tried a joke that just didn’t land, but just in case… It may help to think of it like this: this person is looking for a suggestion. What kind of suggestion? A software suggestion
deleted by creator
