Honestly, if I were designing active guitar gear, I might just try to push 24v phantom power and XLR cables. Have a little power box at the amp or pedalboard and ditch the onboard battery entirely.

But I loathe alkaline batteries…

Their big defense seems to be, “We haven’t even done anything yet.”

Sorry Bambu, but you’re late to the enshittification game. Setting up a situation where you CAN do these things is a Chekhov gun: sooner or later, we know you’ll put them to use.

There’s already a project to retrofit klipper hardware.

https://github.com/ChazLayyd/Bambu-Lab-Klipper-Conversion/blob/main/README.md

As it turns out, there’s already a project… https://github.com/ChazLayyd/Bambu-Lab-Klipper-Conversion/blob/main/README.md

Just did this yesterday. You won’t need the whole afternoon. It was surprisingly simple.

I’m unconcerned. I knew what I was getting into with a walled garden ecosystem, and though I didn’t expect them to dive straight into the enshittification deep end, I figures they would eventually do something fairly shady. The real question is how long it will take to release the first X1C-Klipper refit.

Hydroponic Saffron sounds like the name of a jam band of some kind…

I keep meaning to start some saffron crocuses. Good to know they aren’t fans of indoor growing.

Politicians are such profoundly unserious people.

Meh, I don’t think they’re quite foolish enough to go full Juicero, but I won’t be updating my firmware.

Let me put it a different way: your premise was that a level of precision with less than 10ms of variance is necessary. I’m saying that much of the library of recorded music demonstrates that this is not the case.

If your premise is simply, “I’d like to be more precise with my timing,” then by all means. It sounds like you’re already doing the right thing though: lots of practice with a click track. There’s not really a shortcut to forcing your synapses to fire with that level of precision, you just have to keep doing it.

There’s an old joke about someone in New York asking for directions… “How do you get to the Met?” “Practice”

“10ms is barely acceptable” 🤣 I’m sorry, but that’s the funniest thing I’ve read so far today. Do you realize how little of the music you hear on a daily basis meets that criteria?

Nope, you’re missing the point entirely. There’s absolutely nothing stopping me from walking into the other room, tearing apart my X1C and rebuilding it with, let’s say a klipper board, except that it works quite well at the moment… No printer bought right now is likely to be any different in that respect. You’re trying to act like it’s an i-phone, but it just isn’t.

Ten years… Someone apparently thinks they’re funny. I’d like to see their ten year old 3d printer that is still essentially using stock or equivalent components and hasn’t been essentially re-engineered from the ground up. Are you enjoying manually leveling that bed with thumbscrews and a scrap of paper? Still printing on tape, or maybe a piece of glass? This whole hobby is still moving relatively quickly and I wouldn’t be surprised to wind up working with additional axes or other unpredictable innovations ten years from now. Certainly we’ll have gone through multiple “ultimate” build surfaces by then.

Me too.

It has definitely come a long way from my first attempt with it. It’s really usable now and I suspect it will only get better with a larger user base.

There are already several aftermarket suppliers making parts for them, including a drop-in e3d hot end. Look, I generally prefer open source designs, but the hassle-free workflow with an X1C has been worth it.

Also, they sold a PILE of these things, I suspect aftermarket support will continue even if Bambu stops.

“Double shot of espresso with a side of racism please…”

I mean, it’s impressively ornate and academically fascinating, but also absolutely horrifying.

I pop my PEI bed with finished print into the freezer for about 5 minutes. Pops right off, every time. No tape, no glue, I just wash the bed with soapy water between prints.

I got busy with other things and forgot to order.🤷🏼‍♂️ Watching the video right now, just out of curiosity. I’m just happy to see decaf being taken seriously. I often would love a cup of coffee after dinner without spoiling my night’s sleep.

Looks interesting. My primary focus is on engineering materials, but I’d love a truly biodegradable draft filament and I’m willing to put in a bit of time working out how to make it work with my equipment. Looking at Colorfabb’s site, it appears they only sell it in 750g spools which is incredibly frustrating considering my intended use. For a draft filament, the bigger the roll, the better!