i just see a blank page where an article would go. There is a giant ad at the top and typical garbage down the sides and at the bottom, but no text in the article to read.

(edit) is it just an image? I have images disabled so I wonder if that’s my issue.

Thanks for the feedback! So I guess I should buy a megger. Wow… not cheap. I think I see these at local 2nd hand street markets. I often thought “what strange multimeter… so few functions” but I didn’t realize what I was looking at. I will look for something that dials “500V” and has fewer modes than a multimeter, and ideally a “MΩ” printed somewhere although it looks like they won’t all print that on the device. I should probably learn how to test the megger itself so I buy something that works.

I suppose I could try to bring the motor into an appliance repair shop and pay them to test it with a megger.

As far as diagnosis of the whole machine-- suppose it’s true that I have an insulation failure. The control panel LEDs light up correctly when powered on, then when I try to start a program the start button just blinks. Does it seem viable or likely that faulty insulation would cause the controller to behave that way? I get the impression that the blinking LED means the controller detected an unspecified fault of some kind & refused to continue, which tempts me to think that the controller is functioning correctly – unless it’s a false positive of a failure.

I really want to avoid replacing multiple major parts because I don’t imagine I can return special ordered parts.

(update) At the street market I saw something like this for €100:

https://www.tekcoplus.com/cdn/shop/products/gain-express-gainexpress-Multimeter-SM-852B-set_1024x1024.jpg?v=1553658696

which was apparently a lousy price. I also saw a megger for €160 that looked kind of like this:

https://cdn.globalso.com/hvhipot/GD3128-Series-Insulation-Resistance-Tester2.jpg

I guess that’s what I need. It’s probably a good price for what it is, but not justified for my mission.

Right but I think that safety capacitor (SC) is the last thing I care about. IIUC, I could perhaps even simply bypass the SC because it’s merely improving the power quality/safety. It’s not worth buying an SC unless I can fix whatever is broken. If I could get the machine working, I could then of course consider replacing the SC as a final protective measure – but I’m not even sure anything is wrong with the SC.

The task at hand is testing every essential component of the washing machine, starting with the motor and tacho. I would like to understand what happened with the SC and motor though. Did I wire the motor wrong which caused the SC to flash and produce bad output for a moment? I don’t want to repeat that. I could power the motor directly without the SC, but if the motor is doing upstream damage then I guess I wouldn’t want my breaker box on the chopping block.

IRC for Android ← antithetical to privacy
IRC for linux PCs that can be hardened and routed over Tor ← privacy respecting

This thread does not belong here.

I’d rather see mods have less power not more

I would rather see mods have use less power, not more.

When you give them blunt instruments, you encourage excessive use of power. When you give them only an AK-47, they will use that to cut the head off a chicken rather than a machete (as you withheld the machete as it would be too empowering).

The metadata in the headers can be avoided using Memoryhole and similar protocols which embed the headers inside the encrypted payload. The problem is again barrier to entry. Low-tech users generally can’t even handle app installs on desktops.

When you say “worry”, that’s not the right word for it. My boycott against Google is not fear-driven. I will not feed Google anything it can profit from as an ethical stance. Even if an expert linux tor user were on Google, I’m not sure we could exchange email in a way that ensures Google gets no profitable data. If we use PGP coupled with Memoryhole to strip out the headers, I’m not sure Google would accept a msg with a missing or bogus From: header. But if so, Google still possibly learns the user’s timezone. Though that may be useless if Google learns nothing else about that user. But we’re talking obscure corner cases at this point. Such an expert user would have no Google dependency anyway.

MS/google-dependent friends are generally extremely low-tech. They don’t know the difference between Firefox and the Internet. They don’t know the difference between Wi-Fi and Internet. Linux – what’s linux? They would say. At best, they just think of it as a mysterious nerd tool to be avoided. So what can I do wholly on my end to reach them via gmail without Google getting a shred of profitable data? Nothing really. So I just don’t connect directly with a large segment of friends and family. Some of them are probably no longer reachable. Some are in touch with people who connect to me via XMPP, so sometimes info/msgs get proxied through the few XMPP users. It’s still a shitshow because Google still gets fed through that proxied inner circle of friends and family. In the past when someone needed to reach me directly, they would create a Hushmail or Protonmail mail account for that temporary purpose (like coordinating a trip somewhere). But that option is mostly dead.

I just had to reach out to plumbers for quotes. All of them are gmail-served. All I could do is refuse to share my email address and push them to use analog mechanisms. They are not hungry enough for business to alter their online workflow or create protonmail accounts.

That’s exactly what I did with hushmail. I would tell low-tech folks to get a hushmail account then I would use hushtools.com to do all the key management, putting my key on the keyring and grabbing their key. So the other person did not need to know anything or take any special steps. That was best option of my time. But last time I checked hushmail was still entirely non-gratis.

Protonmail emerged when HM became non-gratis and messed with hushtools. But PM requires every one of their own users to do key management which creates a barrier to entry. I would have to walk a PM user through adding my key to my record in their address book and walk them through sending me their key. That effort is a show stopper for many. I might as well walk them through setting up a PGP-capable MUA. But then if they keep their gmail or MS acct the metadata still feeds those corps.

This simple answer is no doubt the most overlooked; probably as a consequence of the tyranny of convenience… people too lazy to go to the library.

I give out my XMPP address and offer Snikket accounts. Some go along with it and some do not. I lost touch with some friends. Some people are in contact via phone but that’s not ideal some connections are lost as phone numbers change.

I used to push some people toward Hushmail until they dropped the gratis plans. Then for a while I pressured people onto Protonmail but then distanced myself from PM when the brought in Google reCAPTCHAs and killed off Hydroxide. Tuta is a non-starter because Tuta’s variety of e2ee is incompatible with open standards, thus forcing me to periodically login to a web UI (also due to them sabotaging their Android app by way of forced obsolescence pushed in the most incompetent way).

So it’s a shitty state of affairs. 2024 and simply sending a msg to someone has become a total shitshow.

For what it’s worth, I didn’t mean take the sensor out of the wall, but just electrically unplug it from the controller to see what it does on its own when you turn on the water.

Yeah I figured that but the terminals on the sensor are hard to reach so I was figuring I would need to remove it. But then it occurred to me that I could leave the thing in place and do the isolated test by unplugging the X2 connector from the motherboard and easily access the pins through that connector. So that’s what I did. Results:

• at rest, the signal wire is 4.75 V
• water running, the signal wire is 2.3 V

So in isolation the sensor worked correctly. Then I plugged it back into the motherboard and retested to confirm again the bad voltages. But in fact the readings were correct. It’s unclear why it works now. I wonder if the unplugging and replugging of the x2 connector improved a connection that deteriorated somehow.

Thanks for saving me €36! However incidental. If I had not done the test in isolation, I probably would not have messed with the X2 connector. I would have normally just replaced the sensor as an experiment.

It shows 5V on the diagram but I don’t think that’s precise. I measured the red wire at 4.68v which is around what the guy in the video got in his test. Since the board is part of the circuit I suppose I cannot rule out the board as a problem. Testing the sensor in isolation will be rough going because it’s a proprietary joint. So I would have to get a tight rubber hose and fit that onto a garden hose. For powering it I have a switchable ac adapter with a 4.5 V setting. Or I can maybe get 5V off a USB charger or ATX PSU from a PC. My multimeter does not have a frequency function but I can see from the video that it would be useful for this so I might look for 2nd hand multimeter at the next street market, though that will set me back a week (OTOH might be worth it if it helps diagnose this in a way that helps avoid buying the wrong part).

Whatever is broken here, it was something that gradually failed. For several months it was a gamble when turning on the hot tap whether the boiler would detect it and give hot water. It was like a 50/50 game of chance for a while then getting hot water became progressively less likely until it flatlined.

It shows 5V on the diagram but I don’t think that’s precise. I measured the red wire at 4.68v which is around what the guy in the video got in his test. Since the board is part of the circuit I suppose I cannot rule out the board as a problem. Testing the sensor in isolation will be rough going because it’s a proprietary joint. So I would have to get a tight rubber hose and fit that onto a garden hose. For powering it I have a switchable ac adapter with a 4.5 V setting. Or I can maybe get 5V off a USB charger or ATX PSU from a PC. My multimeter does not have a frequency function but I can see from the video that it would be useful for this so I might look for 2nd hand multimeter at the next street market, though that will set me back a week (OTOH might be worth it if it helps diagnose this in a way that helps avoid buying the wrong part).

Yeah, if by /in system/ you mean connected to the board. I didn’t mess with anything other than to stick my probes onto the wires. The boiler is not switching on to heat water and it acts just as if it is not detecting that water is running. So a broken flow sensor was one of the theories. And since the readings seem quite off from what’s expected I guess buying a new sensor is the right move.

Once I get it removed I’ll see if it looks like I can rebuild it but I don’t expect that to go well. I may not have to waste it though. Considering the at rest voltage is double the running water voltage, it’s still detecting water running. It’s just not giving the voltage the board expects. So one idea is maybe I can repurpose this to turn on a shower light when the shower water is running.

If I had an electronics background I would probably try to do a makeshift gadget that converts 0.66 V to 2V and 1.33 V to 0 V. Then I wouldn’t need a new sensor (which could cost €100… i’ve not checked locally yet but online prices are looking terrible).

Thanks for the feedback. I see that that’s indeed the case.

I refuse to fund my oppressors

Bingo. I live by this philosophy.

Although more precisely: I refuse to fund feed my oppressors. The reason for s/fund/feed/ swap is that our oppressors profit from our data too. So e.g. I won’t even email a gmail user because my data would then feed Google (an oppressor because of how they dictate e-mail terms among other oppressions).

The others are right. Trying to stream from a torrent seems wasteful and complex.

But if you must for some strange reason, perhaps it would work to use webtor.io to produce an http-reachable audio file which could be curl/wget-fetched and piped to an audio decoder/player. I doubt you could make webtor fetch pieces linearly from the beginning. You would likely have to wait until the last piece is fetched to start streaming.

I’ve not fetched subtitles in a while but back when I did, I recall all the websites hosting them were extremely protectionist… more so than any other category of content on the web.

Of course the fix is to have torrents for the subtitle collections, perhaps by language.

Hopefully he asks you to audit a tool you might enjoy using or contributing to.

Sounds good… will be interesting to see if @scratchandgame@lemmy.ml takes you up on the offer!

lemmy.ml (formerly dev.lemmy.ml) was centralized by Cloudflare (after the renaming iirc). It was an embarrassment that the flagship instance was so antithetical to Fedi philosophy. Perhaps due to that well-placed criticism, lemmy.ml eventually dropped CF. But lemmy.ml is still today centralized by disproportionate size. There is also copious political baggage with those admins which has helped drive people off (thus beneficial shrinkage) but which ultimately enabled/led lemmy.world to become the biggest most centralized instance (which is centralized by both factors: Cloudflare and disproportionate size).

In the big scheme of things, AFAICT beehaw is federated and reachable from other Fedi-principles-respecting instances. I can reach it from other non-walled-garden instances I listed. Grouping beehaw with the walled garden instances is a weird place to draw a line. I’ve only heard about beehaw defederating from instances that are antithetical to the fediverse spirit. But I only know w.r.t the big instances… feel free to point out counter examples. There probably wouldn’t be much chatter about defederation from small instances.