You can disable the NFC or USB transport per protocol on yubikeys with the yubikey manager. I can imagine that the nitrokey can do that too. So if you don’t want to use NFC just disable it.

I think it would be worthwile to lower speed on overhangs and add more cooling on overhangs. That should clear up those patterns.

Yes: “1. Chamber Light Memory: Chamber light preference settings are now saved after power-off.”

Would be great in Intune allowed using the admx.

It would be really funny if it wasn’t so sad.

Framing it as a checkmarx supply chain incident is also disingenious when it was a supply chain attack via bitwarden targeted at bitwarden users.

You could use gyroid infill. It is more tolerant to flow as there are no crossings.

So Micron plans to get about 2k$ per autonomous car? I don’t think so.

Can I plug it in at home when it’s not in use and use the RAM for my PC?

If it’s in corners only tune Pressure Advance, but as this is on the first layer it’s probably only the first layer, which is generally different from subsequent layers. Check the same thing on a higher layer to make sure that there really is a problem.

Oh wow. TL;DR They found out that, if you can do mitm on a TLS connection with valid certificates, you can impersonate the TLS secured service! I don’t get from the article what the novelty is.

So they’re going to deliver sysmon.exe as a windows optional feature. There’s nothing native to it. No config management via GPO or CSP or similar. Nothing. Just replacing the scheduled task/powershell script downloading exe and config by one enabling the feature and downloading the config.

You can set the minimum extrusion width to a small value (20-25%) for better fill. You could also use classic mode with gap fill. You can use ironing for both to improve the results.

Does your slicer have Arachne slicing mode? It will use variable extrusion width which will help to prevent most of those gaps.

Use the recommemded parameters: https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-argon2-04#page-11

Also consider WebauthN/Passkeys. They are much less ressource intensive on the server but useless to an attacker when the database is leaked and as such don’t rely on slowing down the crypto operations.

“The company currently exports Model 3 vehicles from Shanghai to the EU, while it produces the Model Y in Berlin.”

It’s right there in the article if anyone would care to read it.

Your first step will be learning to dry it and keep it dry. I can recommend a scale that can resolve to at least 0.1g so you can measure the weight loss while drying. This will help in seeing when it’s sufficiently dry (put it in dryer and weigh it every hour) and if it took moisture again.

We better should’ve stayed at 640kB.

They will after

Room-scale DnD dungeons anyone?

It looks like there are multiple layers printed without feeding filament, which causes these frays to build up. Could it be that the filament clogs after this layer? Or do you see that filament still properly feeds later? This could happen for example due to heat creep and the filament getting too warm/soft in the extruder to properly feed or you trying to feed too fast.