One beer a day is pretty tight considering the circumstances.

The last few games were awesome. The Super Metroid race was hard to follow, but the runners were a lot of fun together and the finale was incredible.

I like a lot of what GDQ has become.

No. I think it’s for the reasons outlined or suggested in the link I included: increased cost of healthy ingredients, decreased accessibility to the same, people struggling to find time to eat well in the increasingly fast paced world, etc.

My mentioning my personal preference is mostly a concession to nuggets of truth in the 4chan post. It’s also true; there is nothing common about how I would prefer to consume quality food.

Between 1975 and 2016, the prevalence of obesity in Europe rose 138%, with a 21% rise between 2006 and 2016. The prevalence of overweight rose by 51% between 1975 and 2016, and by 8% between 2006 and 2016. It is expected that by 2030, over half of Europe will live with obesity – up to 89% in some countries. No Member State is on track to reach the target of halting the rise in obesity by 2025.

https://www.eufic.org/en/healthy-living/article/europes-obesity-statistics-figures-trends-rates-by-country

The proliferation of unhealthy eating is a big problem for most of Europe, too. They’re on the same path as the US for mostly the same reasons, just a few steps back.

That said, if I’m going to be fat, I’d rather it be because of schnitzel the size of a dinner plate or cacio e pepe over a Monster Burger.

A family in that sort of situation has considered many options. Willing the house to the brother is the easiest, the poster and their mother have reasons for opting against it. They are likely good reasons; in the broader sense, willing property to someone who cannot care for it can in many scenarios be a bad idea.

It’s dangerous to assume the brother would be safe from predation if he owned his home; the poster could do a lot worse than just not paying the bills. This person apparently lacks the ability to pay taxes and ensure proper maintenance. Even just to help with that, the poster will need access to their brother’s banking and tax info. If the brother is compliant it would not be difficult for someone to take advantage of that situation.

Alternately, using their legal ownership of the home the brother could potentially shut the poster out and might actively sabotage efforts to maintain and pay for the home. In that case the property could suffer substantial damage, become dangerous/uninhabitable, or even be lost despite the poster’s efforts. Many people have destructive tendencies.

The more certain way to protect the house for the brother would be to place it in a trust, but that’s not a panacea. Setting up an ironclad trust to prevent selling the house is great until the brother can’t get up the stairs, or the whole family decides to move to Canada, or the brother goes into assisted living, or the property value skyrockets. A trust will also have tax implications and potential costs that need to be considered.

I assume and hope the mother has been advised by a decent estate lawyer on their options. There are scenarios where willing a house to a sibling is the best course of action. I wish the poster luck and hope they’ll act in the interest of their brother for their entire lives.

The type of dice used can meaningfully impact this. The chance of a 2 or 12 rolling 2d6 is 1/36, the chance rolling 1d8+1d4 is 1/32. The chance of rolling 7 on 2d6, the most common result, is 1/6. The chance of rolling a 5, 6, 7, 8, or 9 on a 1d8+1d4, all equally likely, is 1/8 each.

Unlike you I can’t begin to remember the elegant way to find this. I also assume Randall would have it at least close to right.

Tools are a good idea. Probably should follow your lead on that…

I’m mostly looking at whether I would have made any medium sized purchases in the next two yearsl. I might buy some little things in bulk, too, but if there’s any one time purchase where the price is going to jump $200, $300, $500, it’s time to make a decision.

For me that mostly means furniture. I already bought a pair of commodity IKEA bookshelves I’d been considering buying vs building. I might still build replacements, but I would still use what I just bought and domestic lumber won’t be directly subject to a tariff. I’m looking at buying a papasan chair and a mattress as well, probably in the next week or two.

I’ve also considered electronics, but there’s nothing I would buy in the next two years short of some PC components that I’m sure I’ll want. I bought a Quest 3 a while back and it’s been a great purchase.

I did go back through some of my online buying this year to see what I used. I’ll probably buy a few pairs of work shoes and some good soap.

deleted by creator

Sunrise here, tomorrow, is around 7:30. When I take my morning walk, presumably just after I wake up at 5:30 because the walk is supposed to “get my brain ready to work” and I’m supposed to put several hours of work in during the morning, how do I “get sunlight in my eyes”?

deleted by creator

I really appreciate your effort on this forum. I barely thought about Lemmy as a resource for the Olympics until it was too late, which looking back a huge bummer. I also didn’t watch nearly enough…

I am already looking forward to 2026. Going to approach it very differently.

Yeah, even the better boards struggled to break 3,000MT/s with Zen 1. They sure were fun to play with, though, one of the last times I felt like tinkering was actually getting me something.

I’d be curious how the more modern “default” 3600 kits do, I didn’t have a Ryzen system by the time they were popular and cheap.

Some B350m models did get Zen 3 compatibility. Not all, if I remember correctly, though I could be wrong. So whether it’s compatible I think is model dependent. Whether an old B350m has the VRMs for a chunkier CPU would also be a reasonable question.

I mentioned the R5 3600 because the prices on them are great. A 5800X3D does perform better, but I see completed eBay listings at $225+. They also needs a cooler. I see one 3600 that went for about $50 and several that went for $60, which isn’t too much more than a 16gb kit of DDR4.

I would definitely consider a Zen3 CPU for this upgrade, depending on budget.

First generation Ryzen struggles with higher memory speed. You very likely will not get the full 3600MT/s. There’s no real reason to buy slower, just be aware you’re likely going to hit a ceiling.

For gaming you might see bigger improvements from upgrading the CPU, maybe to an R5 3600. That and the memory are both going to offer big performance improvement.

Scratch patterns are in my experience a little overblown, particularly at high degrees of polish. The sharpener they linked you finishes on ceramic, which generally is fairly fine.

Pull through sharpeners’ biggest problem is that they can’t practically get a clean, consistent apex that follows the sweep of the edge. To get close the housing of the sharpening material needs to be extremely rigid, the pressure used needs to be consistent and light, the angle of the knife in the sharpener needs to be consistent from pull to pull, and the sharpening material needs to be very clean. Otherwise the act of sharpening, while perhaps polishing the bevel, drives the apex into steel residue or abrasive or shifts its angle. That will round, grind down, or rip tiny chunks out of the apex. Still gets a pretty sharp edge.

I don’t find pull throughs suffer much with regard to retention. They don’t get a knife as sharp initially, so they do start with a shorter clock. But from there retention is okay. They completely avoid wire edges, which is nice, so in inexperienced hands in a way they much improve retention.

For most knife steels and uses, pull through sharpeners are okay when used with a light hand. What I’m calling a “clean, consistent apex” isn’t practically necessary in pocket knives. The Sharpmaker and several cheap jigs can produce edges like that, though, and those edges definitely feel better in use. At the reasonable additional cost that’s worth it to a lot of people.

It is possible to sharpen a recurve edge on a waterstone with a rounded corner, but having wasted my time learning how I prefer the Sharpmaker. It’s near enough to the same speed, more intuitive, and more difficult for a new sharpener to make a mistake.

Some jigs have rounded stones specifically for recurves; I know there is a Lansky set. I haven’t used one, myself.

I suspect almost all heavy use recurve blades, carpet knives come to mind, are sharpened using pull through sharpeners. There are shaped sharpening stones specifically for recurves historically used in trade work, but they’re going to kind of suck.

Perhaps not a useful avenue for you right now, but my best results on recurves have by far been from paper wheels.

I know you asked how, but if you end up with only a few recurves paying a pro to do it is a reasonable option. Sharpening recurves is a niche inside a niche. No method I’ve tried of doing it by hand feels elegant or “right”.

The solution to this problem is delicious.

I’ve had an argument with a CEC about whether brown sauce or demi-glace is the mother sauce. Quote from Escoffier:

“[Demi-glace] is the base of all the other smaller brown sauces.”

He also says demi-glace is “Espagnole sauce having reached the limit of perfection.” It’s not crazy to say they’re the same sauce, just that one is actually done.

Functionally it’s true, you just don’t use brown sauce as an ingredient for much if anything other than demi. Or more commonly just buy the demi to save space and time.

Escoffier’s version includes veal, but it is made using milk. Page 21.

https://archive.org/details/cu31924000610117/page/21/mode/1up